book-style emc/rfi filter for inverters and power d rive systems emc/emi products fn 258 industry standard emc solution for three-phase pds filtering slim space-saving book-style housing solid safety connector blocks or optional wire output connections excellent attenuation performance hv versions for up to 690 vac hvit versions for it distribution networks p/l versions with low leakage current technical specifications maximum continuous operating voltage 3x 480/277 vac (fn 258, fn 258l, fn 258p) 3x 690/400 vac (fn 258hv, fn 258hvit) operating frequency dc to 60hz rated currents 7 to 250 a @ 50 c (480v filters) high potential test voltage p C> e 2650 vdc for 2 sec (480v filters) p C> p 2100 vdc for 2 sec (480v filters) p C> e 3100 vdc for 2 sec (690v filters) p C> p 3000 vdc for 2 sec (690v filters) protection category ip20 overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour temperature range (operation and storage) -25 c to +100 c (25/100/21) flammability corresponding to ul 94 v-2 or better design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 information under the labels ul/csa: hv and hvit up to 600 vac mtbf @ 50c/400v (mil-hb-217f) 220,000 hours approvals ul/csa: fm 258 up to 180 a (ex. -180-07) features and benefits fn 258 range of filters provides state-of- the-art emi attenuation based on an innovative multi-stage filter topology. they help to ensure compliance wit h class a or even class b limits the slim book-style shape allows a convenient and space-saving installation next to inverters and motor drives with 480 vac rating and filter modules from 7 to 250 a, fn 258 are ready for the most diverse applications worldwide fn 258 hv filters up to 130 a are designed for 690 vac distribution networks fn 258hvit filters up to 130 a meet the special requirements for the application in industrial 690 vac it distribution networks fn 258l and fn 258p filters help to fulfill tough requirements in respect of leakage current limitation and provide an excellent solution to overcome problems with nuisance tripping of sensitive earth leakage detectors typical applications three-phase variable speed drives and power drive systems (pds) it power distribution networks (fn 258hvit) applications comprising energy conversion devices (inverters, converters) process automation equipment three-phase power supplies and ups applications with low-leakage current requirements (fn 258l and fn 258p) typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter* rated current typical drive leakage current *** power loss input output weight @ 50 c (40 c) power rating** @ 440 vac/50 hz @ 25 c/50 hz connections connections [a] [kw] [ma] [w] [kg] fn 258-7-.. 7 (7.7) 4 16.5 9 -29 -07 -29 1.0 fn 258-16-.. 16 (17.5) 7.5 18.3 20 -29 -07 -29 1.4 fn 258-30-.. 30 (33) 15 24.2 21 -33 -07 -33 1.7 fn 258-42-.. 42 (46) 22 25.8 30 -33 -07 -33 2.5 fn 258-55-.. 55 (60) 30 25.8 30 -34 -07 -34 2.9 fn 258-75-34 75 (82) 37 25.8 24 -34 -34 3.9 fn 258-100-35 100 (110) 55 25.8 51 -35 -35 5.5 fn 258-130-35 130 (143) 75 30.0 50 -35 -35 6.9 fn 258-180-.. 180 (197) 90 30.0 73 -40 -07 -40 11.0 fn 258-250-.. 250 (275) 132 30.0 79 -40 -07 -40 12.0 fn 258hv-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hv-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hv-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hv-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hv-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hv-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hv-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hv-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258hvit-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hvit-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hvit-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hvit-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hvit-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hvit-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hvit-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hvit-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258l-7-.. 7 (7.7) 4 0.8 9 -29 -07 -29 1.0 fn 258l-16-.. 16 (17.5) 7.5 0.8 20 -29 -07 -29 1.4 fn 258l-30-.. 30 (33) 15 0.8 21 -33 -07 -33 1.7 fn 258l-42-.. 42 (46) 22 0.7 30 -33 -07 -33 2.5 fn 258l-55-.. 55 (60) 30 0.7 30 -34 -07 -34 2.9 fn 258l-75-34 75 (82) 37 0.7 24 -34 -34 3.9 fn 258l-100-35 100 (110) 55 0.7 51 -35 -35 5.5 fn 258l-130-35 130 (143) 75 0.7 50 -35 -35 6.9 fn 258l-180-.. 180 (197) 90 0.7 73 -40 -07 -40 11.0 fn 258l-250-07 250 (275) 132 0.7 79 -40 -07 12.0 fn 258p-7-.. 7 (7.7) 4 3.3 9 -29 -07 -29 1.0 fn 258p-16-.. 16 (17.5) 7.5 3.3 20 -29 -07 -29 1.4 fn 258p-30-.. 30 (33) 15 3.3 21 -33 -07 -33 1.7 fn 258p-42-.. 42 (46) 22 3.5 30 -33 -07 -33 2.5 fn 258p-55-.. 55 (60) 30 3.5 30 -34 -07 -34 2.9 fn 258p-75-34 75 (82) 37 3.5 24 -34 -34 3.9 fn 258p-100-35 100 (110) 55 3.5 51 -35 -35 5.5 fn 258p-130-35 130 (143) 75 3.5 50 -35 -35 6.9 fn 258p-180-.. 180 (197) 90 3.5 73 -40 -07 -40 11.0 fn 258p-250-07 250 (275) 132 3.6 79 -40 -07 12.0 * ** to compile a complete part number, please replace t he -.. with the required output connection style. ** * calculated at rated current, 440 vac (fn 258) / 690 vac (fn 258 hv) and cos phi = 0.8. the exact value depends upon the efficiency of the drive, the moto r and the entire *** application. ***maximum leakage under normal operating condition s (fn 258 at 440 v, fn 258 hv at 690 v). note: if t wo phases are interrupted, worst case leakage could reach 5.7 times *** higher levels. emc/emi products schaffner group datasheets 2014 typical filter attenuation per cispr 17; a = 50 /50 sym; b = 50 /50 asym ; c = 0.1 /100 sym; d = 100 /0.1 sym 7 to 30 a types 42 to 100 a types 130 a types 180 and 250 a types note: typical attenuation performance of fn 258 sta ndard filters. the behavior of fn 258 hv, fn 258hvi t, fn 258p and fn 258l may be slightly different. mechanical data 7 to 55 a types (-07) 7 to 130 a types (-29, -33, -34, -35) 180 and 250 a types (-07) 180 and 250 a types (-40) note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. emc/emi products schaffner group datasheets 2014 dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a 250 a a 255 305 335 329 329 329 379 439 438 478 b 50 55 60 70 80 80 90 110 110 110 c 126 142 150 185 185 220 220 240 240 240 d 225 275 305 300 300 300 350 400 400 440 e 240 290 320 314 314 314 364 414 413 453 f 25 30 35 45 55 55 65 80 80 80 g 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 h 1 1 1 1.5 1.5 1.5 1.5 3 4 4 i 10.9 10.9 25 25 39 39 45 45 51 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 m10 k 25 27.5 30 35 40 40 45 55 55 55 l 85 100 110 130 105 140 130 140 110 110 x* awg 16 awg 14 awg 10 awg 8 awg 6 50 mm 2 70 mm 2 y* 300 10 300 10 400 10 500 10 500 10 500 10 500 10 z* 9 9 9 12 12 15 15 * filters with output wire connections (-07) only. all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -29 -33 -34 -35 -40 solid wire 6 mm 2 16 mm 2 35 mm 2 50 mm 2 95 mm 2 flex wire 4 mm 2 10 mm 2 25 mm 2 50 mm 2 95 mm 2 awg type wire awg 10 awg 6 awg 2 awg 1/0 awg 4/0 recommended torque 0.6-0.8 nm 1.5-1.8 nm 4.0-4.5 nm 7-8 nm 17-20 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffnerusa.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
2 book-style emc/rfi filter for inverters and power d rive systems emc/emi products fn 258 industry standard emc solution for three-phase pds filtering slim space-saving book-style housing solid safety connector blocks or optional wire output connections excellent attenuation performance hv versions for up to 690 vac hvit versions for it distribution networks p/l versions with low leakage current technical specifications maximum continuous operating voltage 3x 480/277 vac (fn 258, fn 258l, fn 258p) 3x 690/400 vac (fn 258hv, fn 258hvit) operating frequency dc to 60hz rated currents 7 to 250 a @ 50 c (480v filters) high potential test voltage p C> e 2650 vdc for 2 sec (480v filters) p C> p 2100 vdc for 2 sec (480v filters) p C> e 3100 vdc for 2 sec (690v filters) p C> p 3000 vdc for 2 sec (690v filters) protection category ip20 overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour temperature range (operation and storage) -25 c to +100 c (25/100/21) flammability corresponding to ul 94 v-2 or better design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 information under the labels ul/csa: hv and hvit up to 600 vac mtbf @ 50c/400v (mil-hb-217f) 220,000 hours approvals ul/csa: fm 258 up to 180 a (ex. -180-07) features and benefits fn 258 range of filters provides state-of- the-art emi attenuation based on an innovative multi-stage filter topology. they help to ensure compliance wit h class a or even class b limits the slim book-style shape allows a convenient and space-saving installation next to inverters and motor drives with 480 vac rating and filter modules from 7 to 250 a, fn 258 are ready for the most diverse applications worldwide fn 258 hv filters up to 130 a are designed for 690 vac distribution networks fn 258hvit filters up to 130 a meet the special requirements for the application in industrial 690 vac it distribution networks fn 258l and fn 258p filters help to fulfill tough requirements in respect of leakage current limitation and provide an excellent solution to overcome problems with nuisance tripping of sensitive earth leakage detectors typical applications three-phase variable speed drives and power drive systems (pds) it power distribution networks (fn 258hvit) applications comprising energy conversion devices (inverters, converters) process automation equipment three-phase power supplies and ups applications with low-leakage current requirements (fn 258l and fn 258p) typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter* rated current typical drive leakage current *** power loss input output weight @ 50 c (40 c) power rating** @ 440 vac/50 hz @ 25 c/50 hz connections connections [a] [kw] [ma] [w] [kg] fn 258-7-.. 7 (7.7) 4 16.5 9 -29 -07 -29 1.0 fn 258-16-.. 16 (17.5) 7.5 18.3 20 -29 -07 -29 1.4 fn 258-30-.. 30 (33) 15 24.2 21 -33 -07 -33 1.7 fn 258-42-.. 42 (46) 22 25.8 30 -33 -07 -33 2.5 fn 258-55-.. 55 (60) 30 25.8 30 -34 -07 -34 2.9 fn 258-75-34 75 (82) 37 25.8 24 -34 -34 3.9 fn 258-100-35 100 (110) 55 25.8 51 -35 -35 5.5 fn 258-130-35 130 (143) 75 30.0 50 -35 -35 6.9 fn 258-180-.. 180 (197) 90 30.0 73 -40 -07 -40 11.0 fn 258-250-.. 250 (275) 132 30.0 79 -40 -07 -40 12.0 fn 258hv-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hv-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hv-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hv-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hv-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hv-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hv-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hv-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258hvit-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hvit-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hvit-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hvit-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hvit-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hvit-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hvit-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hvit-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258l-7-.. 7 (7.7) 4 0.8 9 -29 -07 -29 1.0 fn 258l-16-.. 16 (17.5) 7.5 0.8 20 -29 -07 -29 1.4 fn 258l-30-.. 30 (33) 15 0.8 21 -33 -07 -33 1.7 fn 258l-42-.. 42 (46) 22 0.7 30 -33 -07 -33 2.5 fn 258l-55-.. 55 (60) 30 0.7 30 -34 -07 -34 2.9 fn 258l-75-34 75 (82) 37 0.7 24 -34 -34 3.9 fn 258l-100-35 100 (110) 55 0.7 51 -35 -35 5.5 fn 258l-130-35 130 (143) 75 0.7 50 -35 -35 6.9 fn 258l-180-.. 180 (197) 90 0.7 73 -40 -07 -40 11.0 fn 258l-250-07 250 (275) 132 0.7 79 -40 -07 12.0 fn 258p-7-.. 7 (7.7) 4 3.3 9 -29 -07 -29 1.0 fn 258p-16-.. 16 (17.5) 7.5 3.3 20 -29 -07 -29 1.4 fn 258p-30-.. 30 (33) 15 3.3 21 -33 -07 -33 1.7 fn 258p-42-.. 42 (46) 22 3.5 30 -33 -07 -33 2.5 fn 258p-55-.. 55 (60) 30 3.5 30 -34 -07 -34 2.9 fn 258p-75-34 75 (82) 37 3.5 24 -34 -34 3.9 fn 258p-100-35 100 (110) 55 3.5 51 -35 -35 5.5 fn 258p-130-35 130 (143) 75 3.5 50 -35 -35 6.9 fn 258p-180-.. 180 (197) 90 3.5 73 -40 -07 -40 11.0 fn 258p-250-07 250 (275) 132 3.6 79 -40 -07 12.0 * ** to compile a complete part number, please replace t he -.. with the required output connection style. ** * calculated at rated current, 440 vac (fn 258) / 690 vac (fn 258 hv) and cos phi = 0.8. the exact value depends upon the efficiency of the drive, the moto r and the entire *** application. ***maximum leakage under normal operating condition s (fn 258 at 440 v, fn 258 hv at 690 v). note: if t wo phases are interrupted, worst case leakage could reach 5.7 times *** higher levels. emc/emi products schaffner group datasheets 2014 typical filter attenuation per cispr 17; a = 50 /50 sym; b = 50 /50 asym ; c = 0.1 /100 sym; d = 100 /0.1 sym 7 to 30 a types 42 to 100 a types 130 a types 180 and 250 a types note: typical attenuation performance of fn 258 sta ndard filters. the behavior of fn 258 hv, fn 258hvi t, fn 258p and fn 258l may be slightly different. mechanical data 7 to 55 a types (-07) 7 to 130 a types (-29, -33, -34, -35) 180 and 250 a types (-07) 180 and 250 a types (-40) note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. emc/emi products schaffner group datasheets 2014 dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a 250 a a 255 305 335 329 329 329 379 439 438 478 b 50 55 60 70 80 80 90 110 110 110 c 126 142 150 185 185 220 220 240 240 240 d 225 275 305 300 300 300 350 400 400 440 e 240 290 320 314 314 314 364 414 413 453 f 25 30 35 45 55 55 65 80 80 80 g 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 h 1 1 1 1.5 1.5 1.5 1.5 3 4 4 i 10.9 10.9 25 25 39 39 45 45 51 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 m10 k 25 27.5 30 35 40 40 45 55 55 55 l 85 100 110 130 105 140 130 140 110 110 x* awg 16 awg 14 awg 10 awg 8 awg 6 50 mm 2 70 mm 2 y* 300 10 300 10 400 10 500 10 500 10 500 10 500 10 z* 9 9 9 12 12 15 15 * filters with output wire connections (-07) only. all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -29 -33 -34 -35 -40 solid wire 6 mm 2 16 mm 2 35 mm 2 50 mm 2 95 mm 2 flex wire 4 mm 2 10 mm 2 25 mm 2 50 mm 2 95 mm 2 awg type wire awg 10 awg 6 awg 2 awg 1/0 awg 4/0 recommended torque 0.6-0.8 nm 1.5-1.8 nm 4.0-4.5 nm 7-8 nm 17-20 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffnerusa.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
3 book-style emc/rfi filter for inverters and power d rive systems emc/emi products fn 258 industry standard emc solution for three-phase pds filtering slim space-saving book-style housing solid safety connector blocks or optional wire output connections excellent attenuation performance hv versions for up to 690 vac hvit versions for it distribution networks p/l versions with low leakage current technical specifications maximum continuous operating voltage 3x 480/277 vac (fn 258, fn 258l, fn 258p) 3x 690/400 vac (fn 258hv, fn 258hvit) operating frequency dc to 60hz rated currents 7 to 250 a @ 50 c (480v filters) high potential test voltage p C> e 2650 vdc for 2 sec (480v filters) p C> p 2100 vdc for 2 sec (480v filters) p C> e 3100 vdc for 2 sec (690v filters) p C> p 3000 vdc for 2 sec (690v filters) protection category ip20 overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour temperature range (operation and storage) -25 c to +100 c (25/100/21) flammability corresponding to ul 94 v-2 or better design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 information under the labels ul/csa: hv and hvit up to 600 vac mtbf @ 50c/400v (mil-hb-217f) 220,000 hours approvals ul/csa: fm 258 up to 180 a (ex. -180-07) features and benefits fn 258 range of filters provides state-of- the-art emi attenuation based on an innovative multi-stage filter topology. they help to ensure compliance wit h class a or even class b limits the slim book-style shape allows a convenient and space-saving installation next to inverters and motor drives with 480 vac rating and filter modules from 7 to 250 a, fn 258 are ready for the most diverse applications worldwide fn 258 hv filters up to 130 a are designed for 690 vac distribution networks fn 258hvit filters up to 130 a meet the special requirements for the application in industrial 690 vac it distribution networks fn 258l and fn 258p filters help to fulfill tough requirements in respect of leakage current limitation and provide an excellent solution to overcome problems with nuisance tripping of sensitive earth leakage detectors typical applications three-phase variable speed drives and power drive systems (pds) it power distribution networks (fn 258hvit) applications comprising energy conversion devices (inverters, converters) process automation equipment three-phase power supplies and ups applications with low-leakage current requirements (fn 258l and fn 258p) typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter* rated current typical drive leakage current *** power loss input output weight @ 50 c (40 c) power rating** @ 440 vac/50 hz @ 25 c/50 hz connections connections [a] [kw] [ma] [w] [kg] fn 258-7-.. 7 (7.7) 4 16.5 9 -29 -07 -29 1.0 fn 258-16-.. 16 (17.5) 7.5 18.3 20 -29 -07 -29 1.4 fn 258-30-.. 30 (33) 15 24.2 21 -33 -07 -33 1.7 fn 258-42-.. 42 (46) 22 25.8 30 -33 -07 -33 2.5 fn 258-55-.. 55 (60) 30 25.8 30 -34 -07 -34 2.9 fn 258-75-34 75 (82) 37 25.8 24 -34 -34 3.9 fn 258-100-35 100 (110) 55 25.8 51 -35 -35 5.5 fn 258-130-35 130 (143) 75 30.0 50 -35 -35 6.9 fn 258-180-.. 180 (197) 90 30.0 73 -40 -07 -40 11.0 fn 258-250-.. 250 (275) 132 30.0 79 -40 -07 -40 12.0 fn 258hv-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hv-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hv-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hv-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hv-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hv-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hv-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hv-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258hvit-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hvit-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hvit-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hvit-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hvit-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hvit-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hvit-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hvit-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258l-7-.. 7 (7.7) 4 0.8 9 -29 -07 -29 1.0 fn 258l-16-.. 16 (17.5) 7.5 0.8 20 -29 -07 -29 1.4 fn 258l-30-.. 30 (33) 15 0.8 21 -33 -07 -33 1.7 fn 258l-42-.. 42 (46) 22 0.7 30 -33 -07 -33 2.5 fn 258l-55-.. 55 (60) 30 0.7 30 -34 -07 -34 2.9 fn 258l-75-34 75 (82) 37 0.7 24 -34 -34 3.9 fn 258l-100-35 100 (110) 55 0.7 51 -35 -35 5.5 fn 258l-130-35 130 (143) 75 0.7 50 -35 -35 6.9 fn 258l-180-.. 180 (197) 90 0.7 73 -40 -07 -40 11.0 fn 258l-250-07 250 (275) 132 0.7 79 -40 -07 12.0 fn 258p-7-.. 7 (7.7) 4 3.3 9 -29 -07 -29 1.0 fn 258p-16-.. 16 (17.5) 7.5 3.3 20 -29 -07 -29 1.4 fn 258p-30-.. 30 (33) 15 3.3 21 -33 -07 -33 1.7 fn 258p-42-.. 42 (46) 22 3.5 30 -33 -07 -33 2.5 fn 258p-55-.. 55 (60) 30 3.5 30 -34 -07 -34 2.9 fn 258p-75-34 75 (82) 37 3.5 24 -34 -34 3.9 fn 258p-100-35 100 (110) 55 3.5 51 -35 -35 5.5 fn 258p-130-35 130 (143) 75 3.5 50 -35 -35 6.9 fn 258p-180-.. 180 (197) 90 3.5 73 -40 -07 -40 11.0 fn 258p-250-07 250 (275) 132 3.6 79 -40 -07 12.0 * ** to compile a complete part number, please replace t he -.. with the required output connection style. ** * calculated at rated current, 440 vac (fn 258) / 690 vac (fn 258 hv) and cos phi = 0.8. the exact value depends upon the efficiency of the drive, the moto r and the entire *** application. ***maximum leakage under normal operating condition s (fn 258 at 440 v, fn 258 hv at 690 v). note: if t wo phases are interrupted, worst case leakage could reach 5.7 times *** higher levels. emc/emi products schaffner group datasheets 2014 typical filter attenuation per cispr 17; a = 50 /50 sym; b = 50 /50 asym ; c = 0.1 /100 sym; d = 100 /0.1 sym 7 to 30 a types 42 to 100 a types 130 a types 180 and 250 a types note: typical attenuation performance of fn 258 sta ndard filters. the behavior of fn 258 hv, fn 258hvi t, fn 258p and fn 258l may be slightly different. mechanical data 7 to 55 a types (-07) 7 to 130 a types (-29, -33, -34, -35) 180 and 250 a types (-07) 180 and 250 a types (-40) note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. emc/emi products schaffner group datasheets 2014 dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a 250 a a 255 305 335 329 329 329 379 439 438 478 b 50 55 60 70 80 80 90 110 110 110 c 126 142 150 185 185 220 220 240 240 240 d 225 275 305 300 300 300 350 400 400 440 e 240 290 320 314 314 314 364 414 413 453 f 25 30 35 45 55 55 65 80 80 80 g 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 h 1 1 1 1.5 1.5 1.5 1.5 3 4 4 i 10.9 10.9 25 25 39 39 45 45 51 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 m10 k 25 27.5 30 35 40 40 45 55 55 55 l 85 100 110 130 105 140 130 140 110 110 x* awg 16 awg 14 awg 10 awg 8 awg 6 50 mm 2 70 mm 2 y* 300 10 300 10 400 10 500 10 500 10 500 10 500 10 z* 9 9 9 12 12 15 15 * filters with output wire connections (-07) only. all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -29 -33 -34 -35 -40 solid wire 6 mm 2 16 mm 2 35 mm 2 50 mm 2 95 mm 2 flex wire 4 mm 2 10 mm 2 25 mm 2 50 mm 2 95 mm 2 awg type wire awg 10 awg 6 awg 2 awg 1/0 awg 4/0 recommended torque 0.6-0.8 nm 1.5-1.8 nm 4.0-4.5 nm 7-8 nm 17-20 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffnerusa.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
4 book-style emc/rfi filter for inverters and power d rive systems emc/emi products fn 258 industry standard emc solution for three-phase pds filtering slim space-saving book-style housing solid safety connector blocks or optional wire output connections excellent attenuation performance hv versions for up to 690 vac hvit versions for it distribution networks p/l versions with low leakage current technical specifications maximum continuous operating voltage 3x 480/277 vac (fn 258, fn 258l, fn 258p) 3x 690/400 vac (fn 258hv, fn 258hvit) operating frequency dc to 60hz rated currents 7 to 250 a @ 50 c (480v filters) high potential test voltage p C> e 2650 vdc for 2 sec (480v filters) p C> p 2100 vdc for 2 sec (480v filters) p C> e 3100 vdc for 2 sec (690v filters) p C> p 3000 vdc for 2 sec (690v filters) protection category ip20 overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour temperature range (operation and storage) -25 c to +100 c (25/100/21) flammability corresponding to ul 94 v-2 or better design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 information under the labels ul/csa: hv and hvit up to 600 vac mtbf @ 50c/400v (mil-hb-217f) 220,000 hours approvals ul/csa: fm 258 up to 180 a (ex. -180-07) features and benefits fn 258 range of filters provides state-of- the-art emi attenuation based on an innovative multi-stage filter topology. they help to ensure compliance wit h class a or even class b limits the slim book-style shape allows a convenient and space-saving installation next to inverters and motor drives with 480 vac rating and filter modules from 7 to 250 a, fn 258 are ready for the most diverse applications worldwide fn 258 hv filters up to 130 a are designed for 690 vac distribution networks fn 258hvit filters up to 130 a meet the special requirements for the application in industrial 690 vac it distribution networks fn 258l and fn 258p filters help to fulfill tough requirements in respect of leakage current limitation and provide an excellent solution to overcome problems with nuisance tripping of sensitive earth leakage detectors typical applications three-phase variable speed drives and power drive systems (pds) it power distribution networks (fn 258hvit) applications comprising energy conversion devices (inverters, converters) process automation equipment three-phase power supplies and ups applications with low-leakage current requirements (fn 258l and fn 258p) typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter* rated current typical drive leakage current *** power loss input output weight @ 50 c (40 c) power rating** @ 440 vac/50 hz @ 25 c/50 hz connections connections [a] [kw] [ma] [w] [kg] fn 258-7-.. 7 (7.7) 4 16.5 9 -29 -07 -29 1.0 fn 258-16-.. 16 (17.5) 7.5 18.3 20 -29 -07 -29 1.4 fn 258-30-.. 30 (33) 15 24.2 21 -33 -07 -33 1.7 fn 258-42-.. 42 (46) 22 25.8 30 -33 -07 -33 2.5 fn 258-55-.. 55 (60) 30 25.8 30 -34 -07 -34 2.9 fn 258-75-34 75 (82) 37 25.8 24 -34 -34 3.9 fn 258-100-35 100 (110) 55 25.8 51 -35 -35 5.5 fn 258-130-35 130 (143) 75 30.0 50 -35 -35 6.9 fn 258-180-.. 180 (197) 90 30.0 73 -40 -07 -40 11.0 fn 258-250-.. 250 (275) 132 30.0 79 -40 -07 -40 12.0 fn 258hv-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hv-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hv-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hv-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hv-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hv-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hv-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hv-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258hvit-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hvit-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hvit-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hvit-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hvit-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hvit-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hvit-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hvit-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258l-7-.. 7 (7.7) 4 0.8 9 -29 -07 -29 1.0 fn 258l-16-.. 16 (17.5) 7.5 0.8 20 -29 -07 -29 1.4 fn 258l-30-.. 30 (33) 15 0.8 21 -33 -07 -33 1.7 fn 258l-42-.. 42 (46) 22 0.7 30 -33 -07 -33 2.5 fn 258l-55-.. 55 (60) 30 0.7 30 -34 -07 -34 2.9 fn 258l-75-34 75 (82) 37 0.7 24 -34 -34 3.9 fn 258l-100-35 100 (110) 55 0.7 51 -35 -35 5.5 fn 258l-130-35 130 (143) 75 0.7 50 -35 -35 6.9 fn 258l-180-.. 180 (197) 90 0.7 73 -40 -07 -40 11.0 fn 258l-250-07 250 (275) 132 0.7 79 -40 -07 12.0 fn 258p-7-.. 7 (7.7) 4 3.3 9 -29 -07 -29 1.0 fn 258p-16-.. 16 (17.5) 7.5 3.3 20 -29 -07 -29 1.4 fn 258p-30-.. 30 (33) 15 3.3 21 -33 -07 -33 1.7 fn 258p-42-.. 42 (46) 22 3.5 30 -33 -07 -33 2.5 fn 258p-55-.. 55 (60) 30 3.5 30 -34 -07 -34 2.9 fn 258p-75-34 75 (82) 37 3.5 24 -34 -34 3.9 fn 258p-100-35 100 (110) 55 3.5 51 -35 -35 5.5 fn 258p-130-35 130 (143) 75 3.5 50 -35 -35 6.9 fn 258p-180-.. 180 (197) 90 3.5 73 -40 -07 -40 11.0 fn 258p-250-07 250 (275) 132 3.6 79 -40 -07 12.0 * ** to compile a complete part number, please replace t he -.. with the required output connection style. ** * calculated at rated current, 440 vac (fn 258) / 690 vac (fn 258 hv) and cos phi = 0.8. the exact value depends upon the efficiency of the drive, the moto r and the entire *** application. ***maximum leakage under normal operating condition s (fn 258 at 440 v, fn 258 hv at 690 v). note: if t wo phases are interrupted, worst case leakage could reach 5.7 times *** higher levels. emc/emi products schaffner group datasheets 2014 typical filter attenuation per cispr 17; a = 50 /50 sym; b = 50 /50 asym ; c = 0.1 /100 sym; d = 100 /0.1 sym 7 to 30 a types 42 to 100 a types 130 a types 180 and 250 a types note: typical attenuation performance of fn 258 sta ndard filters. the behavior of fn 258 hv, fn 258hvi t, fn 258p and fn 258l may be slightly different. mechanical data 7 to 55 a types (-07) 7 to 130 a types (-29, -33, -34, -35) 180 and 250 a types (-07) 180 and 250 a types (-40) note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. emc/emi products schaffner group datasheets 2014 dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a 250 a a 255 305 335 329 329 329 379 439 438 478 b 50 55 60 70 80 80 90 110 110 110 c 126 142 150 185 185 220 220 240 240 240 d 225 275 305 300 300 300 350 400 400 440 e 240 290 320 314 314 314 364 414 413 453 f 25 30 35 45 55 55 65 80 80 80 g 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 h 1 1 1 1.5 1.5 1.5 1.5 3 4 4 i 10.9 10.9 25 25 39 39 45 45 51 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 m10 k 25 27.5 30 35 40 40 45 55 55 55 l 85 100 110 130 105 140 130 140 110 110 x* awg 16 awg 14 awg 10 awg 8 awg 6 50 mm 2 70 mm 2 y* 300 10 300 10 400 10 500 10 500 10 500 10 500 10 z* 9 9 9 12 12 15 15 * filters with output wire connections (-07) only. all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -29 -33 -34 -35 -40 solid wire 6 mm 2 16 mm 2 35 mm 2 50 mm 2 95 mm 2 flex wire 4 mm 2 10 mm 2 25 mm 2 50 mm 2 95 mm 2 awg type wire awg 10 awg 6 awg 2 awg 1/0 awg 4/0 recommended torque 0.6-0.8 nm 1.5-1.8 nm 4.0-4.5 nm 7-8 nm 17-20 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffnerusa.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
5 book-style emc/rfi filter for inverters and power d rive systems emc/emi products fn 258 industry standard emc solution for three-phase pds filtering slim space-saving book-style housing solid safety connector blocks or optional wire output connections excellent attenuation performance hv versions for up to 690 vac hvit versions for it distribution networks p/l versions with low leakage current technical specifications maximum continuous operating voltage 3x 480/277 vac (fn 258, fn 258l, fn 258p) 3x 690/400 vac (fn 258hv, fn 258hvit) operating frequency dc to 60hz rated currents 7 to 250 a @ 50 c (480v filters) high potential test voltage p C> e 2650 vdc for 2 sec (480v filters) p C> p 2100 vdc for 2 sec (480v filters) p C> e 3100 vdc for 2 sec (690v filters) p C> p 3000 vdc for 2 sec (690v filters) protection category ip20 overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour temperature range (operation and storage) -25 c to +100 c (25/100/21) flammability corresponding to ul 94 v-2 or better design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 information under the labels ul/csa: hv and hvit up to 600 vac mtbf @ 50c/400v (mil-hb-217f) 220,000 hours approvals ul/csa: fm 258 up to 180 a (ex. -180-07) features and benefits fn 258 range of filters provides state-of- the-art emi attenuation based on an innovative multi-stage filter topology. they help to ensure compliance wit h class a or even class b limits the slim book-style shape allows a convenient and space-saving installation next to inverters and motor drives with 480 vac rating and filter modules from 7 to 250 a, fn 258 are ready for the most diverse applications worldwide fn 258 hv filters up to 130 a are designed for 690 vac distribution networks fn 258hvit filters up to 130 a meet the special requirements for the application in industrial 690 vac it distribution networks fn 258l and fn 258p filters help to fulfill tough requirements in respect of leakage current limitation and provide an excellent solution to overcome problems with nuisance tripping of sensitive earth leakage detectors typical applications three-phase variable speed drives and power drive systems (pds) it power distribution networks (fn 258hvit) applications comprising energy conversion devices (inverters, converters) process automation equipment three-phase power supplies and ups applications with low-leakage current requirements (fn 258l and fn 258p) typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter* rated current typical drive leakage current *** power loss input output weight @ 50 c (40 c) power rating** @ 440 vac/50 hz @ 25 c/50 hz connections connections [a] [kw] [ma] [w] [kg] fn 258-7-.. 7 (7.7) 4 16.5 9 -29 -07 -29 1.0 fn 258-16-.. 16 (17.5) 7.5 18.3 20 -29 -07 -29 1.4 fn 258-30-.. 30 (33) 15 24.2 21 -33 -07 -33 1.7 fn 258-42-.. 42 (46) 22 25.8 30 -33 -07 -33 2.5 fn 258-55-.. 55 (60) 30 25.8 30 -34 -07 -34 2.9 fn 258-75-34 75 (82) 37 25.8 24 -34 -34 3.9 fn 258-100-35 100 (110) 55 25.8 51 -35 -35 5.5 fn 258-130-35 130 (143) 75 30.0 50 -35 -35 6.9 fn 258-180-.. 180 (197) 90 30.0 73 -40 -07 -40 11.0 fn 258-250-.. 250 (275) 132 30.0 79 -40 -07 -40 12.0 fn 258hv-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hv-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hv-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hv-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hv-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hv-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hv-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hv-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258hvit-7-29 7 (7.7) 5.5 13.0 9 -29 -29 1.0 fn 258hvit-16-29 16 (17.5) 11 19.0 20 -29 -29 1.5 fn 258hvit-30-33 30 (33) 22 19.0 21 -33 -33 1.8 fn 258hvit-42-33 42 (46) 30 21.6 30 -33 -33 2.6 fn 258hvit-55-34 55 (60) 45 21.6 30 -34 -34 3.0 fn 258hvit-75-34 75 (82) 55 21.6 24 -34 -34 4.3 fn 258hvit-100-35 100 (110) 90 21.6 51 -35 -35 5.6 fn 258hvit-130-35 130 (143) 110 25.0 50 -35 -35 7.1 fn 258l-7-.. 7 (7.7) 4 0.8 9 -29 -07 -29 1.0 fn 258l-16-.. 16 (17.5) 7.5 0.8 20 -29 -07 -29 1.4 fn 258l-30-.. 30 (33) 15 0.8 21 -33 -07 -33 1.7 fn 258l-42-.. 42 (46) 22 0.7 30 -33 -07 -33 2.5 fn 258l-55-.. 55 (60) 30 0.7 30 -34 -07 -34 2.9 fn 258l-75-34 75 (82) 37 0.7 24 -34 -34 3.9 fn 258l-100-35 100 (110) 55 0.7 51 -35 -35 5.5 fn 258l-130-35 130 (143) 75 0.7 50 -35 -35 6.9 fn 258l-180-.. 180 (197) 90 0.7 73 -40 -07 -40 11.0 fn 258l-250-07 250 (275) 132 0.7 79 -40 -07 12.0 fn 258p-7-.. 7 (7.7) 4 3.3 9 -29 -07 -29 1.0 fn 258p-16-.. 16 (17.5) 7.5 3.3 20 -29 -07 -29 1.4 fn 258p-30-.. 30 (33) 15 3.3 21 -33 -07 -33 1.7 fn 258p-42-.. 42 (46) 22 3.5 30 -33 -07 -33 2.5 fn 258p-55-.. 55 (60) 30 3.5 30 -34 -07 -34 2.9 fn 258p-75-34 75 (82) 37 3.5 24 -34 -34 3.9 fn 258p-100-35 100 (110) 55 3.5 51 -35 -35 5.5 fn 258p-130-35 130 (143) 75 3.5 50 -35 -35 6.9 fn 258p-180-.. 180 (197) 90 3.5 73 -40 -07 -40 11.0 fn 258p-250-07 250 (275) 132 3.6 79 -40 -07 12.0 * ** to compile a complete part number, please replace t he -.. with the required output connection style. ** * calculated at rated current, 440 vac (fn 258) / 690 vac (fn 258 hv) and cos phi = 0.8. the exact value depends upon the efficiency of the drive, the moto r and the entire *** application. ***maximum leakage under normal operating condition s (fn 258 at 440 v, fn 258 hv at 690 v). note: if t wo phases are interrupted, worst case leakage could reach 5.7 times *** higher levels. emc/emi products schaffner group datasheets 2014 typical filter attenuation per cispr 17; a = 50 /50 sym; b = 50 /50 asym ; c = 0.1 /100 sym; d = 100 /0.1 sym 7 to 30 a types 42 to 100 a types 130 a types 180 and 250 a types note: typical attenuation performance of fn 258 sta ndard filters. the behavior of fn 258 hv, fn 258hvi t, fn 258p and fn 258l may be slightly different. mechanical data 7 to 55 a types (-07) 7 to 130 a types (-29, -33, -34, -35) 180 and 250 a types (-07) 180 and 250 a types (-40) note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. emc/emi products schaffner group datasheets 2014 dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a 250 a a 255 305 335 329 329 329 379 439 438 478 b 50 55 60 70 80 80 90 110 110 110 c 126 142 150 185 185 220 220 240 240 240 d 225 275 305 300 300 300 350 400 400 440 e 240 290 320 314 314 314 364 414 413 453 f 25 30 35 45 55 55 65 80 80 80 g 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 h 1 1 1 1.5 1.5 1.5 1.5 3 4 4 i 10.9 10.9 25 25 39 39 45 45 51 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 m10 k 25 27.5 30 35 40 40 45 55 55 55 l 85 100 110 130 105 140 130 140 110 110 x* awg 16 awg 14 awg 10 awg 8 awg 6 50 mm 2 70 mm 2 y* 300 10 300 10 400 10 500 10 500 10 500 10 500 10 z* 9 9 9 12 12 15 15 * filters with output wire connections (-07) only. all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -29 -33 -34 -35 -40 solid wire 6 mm 2 16 mm 2 35 mm 2 50 mm 2 95 mm 2 flex wire 4 mm 2 10 mm 2 25 mm 2 50 mm 2 95 mm 2 awg type wire awg 10 awg 6 awg 2 awg 1/0 awg 4/0 recommended torque 0.6-0.8 nm 1.5-1.8 nm 4.0-4.5 nm 7-8 nm 17-20 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffnerusa.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
|
